Manual-Update
This is a easy download process user guide, it provides that download method to the end user to download firmware, voice, database, etc...Before executes the download program, you shall check what’s computer installing in your current PC.
Applies to Microsoft Windows XP / 2000 (X86) Service Pack 2 prior to Version
* If you use the Microsoft Windows XP / 2000 (X86) Service Pack 2, you must install upon three programs before downloading.
Applies to Microsoft Windows XP / 2000 (X86) Service Pack 3 prior to Version
* If you use the Microsoft Windows XP / 2000 (X86) Service Pack 3, you must install upon two programs before downloading.
Applies to Microsoft Windows Vista / 7 (X64)
* If you use the Microsoft Windows Vista (X64), you must install upon the program before downloading.
Applies to Microsoft Windows Vista / 7 (X86)
* If you use the Microsoft Windows Vista (X86), you must install upon the program before downloading.
Step 1
Connect the USB download from PC to Speed camera locator.
Step 2
The speed camera locator shall be show the system at download model.
Step 3
Please according to the model and speed camera locator type, select the correctly model icon to download the firmware and the database.
Step 4
After that, there is a message as like as below, and please press OK button to accept the next steps.
Step 5
You can see the application run-security warning message, please press Run button to accept the next steps too.
Step 6
Please press Update button.
Step 7
The program will check the hardware, and then download the firmware, voice, database file from server.
Step 8
Please wait a several minutes, the download speeding is independent on internet condition. If download completely, you can the message as like as below. And you can remove the USB cable from PC.
